{{Short description|Process in a liquid on a vibrating surface}}
'''Ultrasonic atomization''' is a process in which a liquid, in contact with a surface vibrating at ultrasonic frequencies, forms standing capillary waves that lead to the ejection of fine droplets. As the amplitude of these waves increases, the wave crests can reach a critical height where the cohesive forces of the liquid are overcome by the surface tension, leading to the ejection of small droplets from the wave tips.
== Mechanism and principles == thumb|Ultrasonic atomization<ref name=":2" /> The formation of droplets during ultrasonic atomization remains complex and not fully understood, though several theories attempt to explain it. One leading theory, the capillary wave hypothesis by Lang,<ref>{{Cite journal |last=Lang |first=Robert J. |date=1962-01-01 |title=Ultrasonic Atomization of Liquids |url=https://pubs.aip.org/jasa/article/34/1/6/734260/Ultrasonic-Atomization-of-Liquids |journal=The Journal of the Acoustical Society of America |language=en |volume=34 |issue=1 |pages=6–8 |doi=10.1121/1.1909020 |bibcode=1962ASAJ...34....6L |issn=0001-4966|url-access=subscription }}</ref> suggests that droplets form at the peaks of capillary waves on the liquid surface. Lang developed a formula that relates droplet size to capillary wavelength. The average diameter estimation was obtained using a constant that was later adjusted by Yasuda<ref>{{Cite journal |last1=Yasuda |first1=Keiji |last2=Bando |first2=Yoshiyuki |last3=Yamaguchi |first3=Soyoko |last4=Nakamura |first4=Masaaki |last5=Oda |first5=Akiyoshi |last6=Kawase |first6=Yasuhito |date=January 2005 |title=Analysis of concentration characteristics in ultrasonic atomization by droplet diameter distribution |url=https://linkinghub.elsevier.com/retrieve/pii/S1350417704001026 |journal=Ultrasonics Sonochemistry |language=en |volume=12 |issue=1–2 |pages=37–41 |doi=10.1016/j.ultsonch.2004.05.008|pmid=15474950 |bibcode=2005UltS...12...37Y |url-access=subscription }}</ref> to better predict smaller droplet sizes in the micrometer range. This prediction aligns well with observations from laser diffraction, though other methods have detected finer droplets that Lang's model does not account for. An alternative theory, proposed by Sollner,<ref>{{Cite journal |last=Söllner |first=Karl |date=1936 |title=The mechanism of the formation of fogs by ultrasonic waves |url=https://xlink.rsc.org/?DOI=TF9363201532 |journal=Trans. Faraday Soc. |language=en |volume=32 |pages=1532–1536 |doi=10.1039/TF9363201532 |issn=0014-7672|url-access=subscription }}</ref> is the cavitation hypothesis. This theory links droplet formation to cavitation—when bubbles in the liquid rapidly form and collapse, creating shockwaves that break apart the liquid surface into droplets. Sollner's findings suggest cavitation is essential for dispersing liquids and shares similarities with emulsion formation. A combined theory was later proposed by Bograslavski and Eknadiosyants,<ref>{{Cite journal |last=Eknadiosyants |first=O.K. |date=January 1969 |title=Role of cavitation in the process of liquid atomization in an ultrasonic fountain |url=https://linkinghub.elsevier.com/retrieve/pii/0041624X69905605 |journal=Ultrasonics |language=en |volume=7 |issue=1 |pages=78 |doi=10.1016/0041-624X(69)90560-5|url-access=subscription }}</ref> suggesting that both mechanisms work together: shockwaves from cavitation enhance the breaking of capillary wave crests, leading to droplet formation. However, this combined theory faces some scepticism, as cavitation requires high power at MHz frequencies, which some researchers argue may be too high to support this mechanism effectively in practice.<ref>{{Citation |last=Nii |first=Susumu |title=Ultrasonic Atomization |date=2016 |work=Handbook of Ultrasonics and Sonochemistry |pages=239–257 |url=http://link.springer.com/10.1007/978-981-287-278-4_7 |access-date=2024-11-08 |place=Singapore |publisher=Springer Singapore |language=en |doi=10.1007/978-981-287-278-4_7 |isbn=978-981-287-277-7|url-access=subscription }}</ref>
== History == The phenomenon of ultrasonic atomization was first reported by Wood and Loomis in 1927.<ref>{{Cite journal |last1=Wood |first1=R.W. |last2=Loomis |first2=Alfred L. |date=September 1927 |title=XXXVIII. The physical and biological effects of high-frequency sound-waves of great intensity |url=http://www.tandfonline.com/doi/abs/10.1080/14786440908564348 |journal=The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science |language=en |volume=4 |issue=22 |pages=417–436 |doi=10.1080/14786440908564348 |bibcode=1927LEDPM...4..417W |issn=1941-5982|url-access=subscription }}</ref> They observed that a fine mist was produced from the liquid surface when a liquid layer was subjected to high-frequency sound waves. Wood and Loomis's work hinted at a variety of applications for ultrasonics, many of which became realities in later decades, with the development in the scope of ultrasound generation (piezoelectricity), transfer (sonotrode materials), and control (horn analyzers).
=== Atomization of aqueous solutions === First commercial application of ultrasonic atomization effect was nebulizers. Ultrasonic nebulizers made their first appearance in 1949, initially designed as humidifiers. Medical professionals quickly recognized their potential for delivering therapeutic aerosols suitable for inhalation,<ref>{{Cite journal |last=Ari |first=Arzu |date=2014-05-12 |title=Jet, Ultrasonic, and Mesh Nebulizers: An Evaluation of Nebulizers for Better Clinical Outcomes |url=https://www.journalagent.com/z4/download_fulltext.asp?pdir=eurasianjpulmonol&plng=eng&un=SOLUNUM-00087 |journal=Eurasian Journal of Pulmonology |volume=16 |issue=1 |pages=1–7 |doi=10.5152/ejp.2014.00087|doi-access=free }}</ref> leading to the incorporation of medications into the nebulization process.<ref>{{Cite journal |last1=Yeo |first1=Leslie Y |last2=Friend |first2=James R |last3=McIntosh |first3=Michelle P |last4=Meeusen |first4=Els NT |last5=Morton |first5=David AV |date=June 2010 |title=Ultrasonic nebulization platforms for pulmonary drug delivery |url=http://www.tandfonline.com/doi/full/10.1517/17425247.2010.485608 |journal=Expert Opinion on Drug Delivery |language=en |volume=7 |issue=6 |pages=663–679 |doi=10.1517/17425247.2010.485608 |pmid=20459360 |issn=1742-5247|url-access=subscription }}</ref> Ultrasonic nebulizers have been utilized for various respiratory diseases, including asthma and cystic fibrosis. Their ability to deliver medications directly to the lungs has made them a valuable tool in managing these conditions<ref>{{Cite journal |last=Dessanges |first=Jean-François |date=March 2001 |title=A History of Nebulization |url=http://www.liebertpub.com/doi/10.1089/08942680152007918 |journal=Journal of Aerosol Medicine |language=en |volume=14 |issue=1 |pages=65–71 |doi=10.1089/08942680152007918 |pmid=11495487 |issn=0894-2684|url-access=subscription }}</ref>
=== Aqueous solutions containing metal derivatives === In the late 20th century, scientists exploring nanoparticle synthesis via spray pyrolysis began to see ultrasonic atomization as a promising technique for precursor droplet formation such as noble metal based salts solutions. Known as ultrasonic spray pyrolysis (USP), this technique allowed for finer control over particle size as it strongly depends on the frequency, making it particularly suited for nanomaterials used in electronic devices, solar cells, and batteries. By the 1980s and 1990s, ultrasonic atomization was gaining ground as researchers demonstrated its utility in producing complex oxides and other materials essential for energy storage like lithium-ion batteries.<ref name=":3">{{Citation |last=Nii |first=Susumu |title=Ultrasonic Atomization |date=2016 |work=Handbook of Ultrasonics and Sonochemistry |pages=239–257 |url=https://link.springer.com/referenceworkentry/10.1007/978-981-287-278-4_7 |access-date=2024-11-03 |place=Singapore |publisher=Springer |language=en |doi=10.1007/978-981-287-278-4_7 |isbn=978-981-287-278-4|url-access=subscription }}</ref> By the early 2000s, this method was integral to industries seeking uniform coatings and nanoparticle films, demonstrating the impact of ultrasonic atomization on industrial manufacturing.<ref>{{Cite journal |last1=Ramisetty |first1=Kiran. A. |last2=Pandit |first2=Aniruddha. B. |last3=Gogate |first3=Parag. R. |date=January 2013 |title=Investigations into ultrasound induced atomization |url=https://linkinghub.elsevier.com/retrieve/pii/S1350417712000909 |journal=Ultrasonics Sonochemistry |language=en |volume=20 |issue=1 |pages=254–264 |doi=10.1016/j.ultsonch.2012.05.001|pmid=22672979 |bibcode=2013UltS...20..254R |url-access=subscription }}</ref>
=== Liquid metals === thumb|200x200px|First-reported metal ultrasonic atomizer<ref name=":0">{{Cite book |last1=Pohlman |first1=Reimar |url=https://link.springer.com/book/10.1007/978-3-663-07399-4 |title=Untersuchung zum Mechanismus der Ultraschallvernebelung an Flüssigkeitsoberflächen im Hinblick auf technische Anwendungen |last2=Stamm |first2=Klaus |date=1965 |isbn=978-3-663-06486-2 |language=en |doi=10.1007/978-3-663-07399-4}}</ref>In 1965, Pohlman and Stamm<ref name=":0" /> published a book, which marked a contribution to the field of ultrasonic atomization by identifying and describing the parameters influencing the process such as viscosity, capillary wavelength, surface tension and amplitude. One of the key chapters in the book, titled "5.1 Vernebelung geschmolzener Metalle," detailed the first experiments on the high temperature ultrasonic atomization in which molten metals were used. They discussed its potential technical applications as well as limitations stating that the transition from successful laboratory experiments to a usable technical plant has not yet been found due to issues with conciliation wettability and sonotrode durability. They were able to atomize lead at 350 °C and showcased the damage to the sonotrode induced by cavitation. In 1967, Lierke and Grießhammer published their work in which they were able to ultrasonically atomize metal with melting points up to 700 °C.<ref>{{Cite journal |last1=Lierke |first1=E.G. |last2=Grießhammer |first2=G. |date=October 1967 |title=The formation of metal powders by ultrasonic atomization of molten metals |url=https://linkinghub.elsevier.com/retrieve/pii/0041624X67900662 |journal=Ultrasonics |language=en |volume=5 |issue=4 |pages=224–228 |doi=10.1016/0041-624X(67)90066-2|url-access=subscription }}</ref>
Later developments of Lierke focused on making high-temperature ultrasonic atomization of metals more practical by stabilizing melt delivery and protecting the transducer from the hot zone. A patent granted in the early 1980s described feeding the liquid into velocity-nodal regions of a bending resonator to maintain an atomizable film, and proposed heating the vibrating resonator (including by induction) together with intermediate cooling sections to shield temperature-sensitive parts of the excitation system.<ref name="Apparatus for atomizing liquids">{{Cite patent|number=US4402458A|title=Apparatus for atomizing liquids|gdate=1983-09-06|invent1=Lierke|invent2=Heide|invent3=Grossbach|invent4=Floegel|inventor1-first=Ernst-Guenter|inventor2-first=Wolfgang|inventor3-first=Rudolf|inventor4-first=Karl|url=https://patents.google.com/patent/US4402458A/en?oq=US4402458}}</ref>
In the early 2000s, Caccioppoli et al. reported a metal atomiser in which an alloy is induction-melted under argon and the melt is disrupted in a tubular ultrasonic resonator operated under an inert atmosphere; drawing on transducer concepts developed by Prokic<ref>{{Cite web |title=THE ULTRASONIC HAMMER TRANSDUCER {{!}} MPI Ultrasonics - sonic and ultrasonic processing technology |url=https://www.mpi-ultrasonics.com/content/ultrasonic-hammer-transducer |access-date=2025-12-31 |website=www.mpi-ultrasonics.com}}</ref>''',''' they described using load-tolerant “hammer”-type ultrasonic transducers designed to be less sensitive to changes in acoustic load than conventional bolt-clamped (Langevin type<ref>{{Cite journal |last1=Kim |first1=Jinwook |last2=Kim |first2=Jinwoo |last3=Kang |first3=Juwon |date=2025-07-19 |title=Advances in Langevin Piezoelectric Transducer Designs for Broadband Ultrasonic Transmitter Applications |journal=Actuators |language=en |volume=14 |issue=7 |pages=355 |doi=10.3390/act14070355 |doi-access=free |issn=2076-0825}}</ref>) designs, improving stability under fluctuating melt conditions. Combined with multifrequency excitation and acoustic-activity sensing, the drive frequency can be swept around resonance, shifting vibration anti-nodes along the resonator, widening the effective atomization zone, and reducing the sensitivity of droplet size to melt flow rate.<ref>{{Cite web |last1=Caccioppoli |first1=Giulio |last2=Clausen |first2=Bernard |last3=Bonjour |first3=Christian |last4=Pralong |first4=Pacal |date=2002 |title=Fabrication of metal powders by ultrasonic atomization |url=https://www.mastersonics.com/documents/mmm_applications/mmm_atomizing/tube_clamp_on_atomizer/mmm-atomizing-system.pdf |archive-url=}}</ref> Variants in which material is melted locally using highly focused energy source reducing the hot zone have been explored where an external heat source primarily generates the melt (e.g., a continuous-wave CO₂ laser producing a melt pool on a consumable substrate) while ultrasonic vibration assists melt ejection and breakup into droplets.<ref>{{Cite journal |last1=Alavi |first1=S. Habib |last2=Harimkar |first2=Sandip P. |date=2017-11-01 |title=Ultrasonic vibration-assisted laser atomization of stainless steel |url=https://www.sciencedirect.com/science/article/pii/S0032591017306502 |journal=Powder Technology |volume=321 |pages=89–93 |doi=10.1016/j.powtec.2017.08.007 |issn=0032-5910|url-access=subscription }}</ref>
In 2017 Żrodowski received a Ministry of Science and Higher Education grant named "Diamentowy grant" during which he studied laser powder bed fusion of zirconium-based bulk metallic glasses. This has resulted in the research and development of ultrasonic atomization of metals for additive manufacturing<ref>{{Cite journal |last1=Żrodowski |first1=Łukasz |last2=Wróblewski |first2=Rafał |last3=Leonowicz |first3=Marcin |last4=Morończyk |first4=Bartosz |last5=Choma |first5=Tomasz |last6=Ciftci |first6=Jakub |last7=Święszkowski |first7=Wojciech |last8=Dobkowska |first8=Anna |last9=Ura-Bińczyk |first9=Ewa |last10=Błyskun |first10=Piotr |last11=Jaroszewicz |first11=Jakub |last12=Krawczyńska |first12=Agnieszka |last13=Kulikowski |first13=Krzysztof |last14=Wysocki |first14=Bartłomiej |last15=Cetner |first15=Tomasz |date=2023-08-25 |title=How to control the crystallization of metallic glasses during laser powder bed fusion? Towards part-specific 3D printing of in situ composites |journal=Additive Manufacturing |volume=76 |article-number=103775 |doi=10.1016/j.addma.2023.103775 |issn=2214-8604|doi-access=free }}</ref> at Warsaw University of Technology and establishing the spin-off company Amazamet. Same year in which research grant was obtained Żrodowski, Rałowicz, Rozpendowski and Czarnecka filed a patent application describing an ultrasonic metal atomizer that deliberately separates the “hot” melting zone from the ultrasonic stack: a water-cooled, non-consumable sonotrode (high thermal conductivity material acting as a heat sink) is terminated with a replaceable consumable melt tip, which is heated by an external source while the sonotrode transmits vibration to promote droplet ejection. Conceptually, the consumable-tip approach is closest to the earlier “local melt pool on a consumable substrate” concept mentioned above (and shares the same goal as Lierke's protected-resonator ideas): keep the transducer and main sonotrode cold, and treat the melt-contacting interface as an expendable, modular element. Since then, cold‑crucible melting routes<ref>{{Cite journal |last1=Żrodowski |first1=Łukasz |last2=Wróblewski |first2=Rafał |last3=Choma |first3=Tomasz |last4=Morończyk |first4=Bartosz |last5=Ostrysz |first5=Mateusz |last6=Leonowicz |first6=Marcin |last7=Łacisz |first7=Wojciech |last8=Błyskun |first8=Piotr |last9=Wróbel |first9=Jan S. |last10=Cieślak |first10=Grzegorz |last11=Wysocki |first11=Bartłomiej |last12=Żrodowski |first12=Cezary |last13=Pomian |first13=Karolina |date=2021-05-13 |title=Novel Cold Crucible Ultrasonic Atomization Powder Production Method for 3D Printing |journal=Materials |language=en |volume=14 |issue=10 |pages=2541 |doi=10.3390/ma14102541 |doi-access=free |issn=1996-1944 |pmc=8153640 |pmid=34068424 |bibcode=2021Mate...14.2541Z }}</ref> and other variants such as induction-based approaches were investigated.
[[File:Ultrasonic atomizer - recent.png|thumb|State of the art metal ultrasonic atomizer<ref>{{Cite web |title=rePOWDER - Ultrasonic Powder Atomizer {{!}} AMAZEMET |url=https://www.amazemet.com/repowder-configurator/ |access-date=2024-11-03 |website=AMAZEMET {{!}} Freedom In Metal Additive Manufacturing |language=en-US}}</ref>|195x195px|left]]In 2024 a joint article lead by Dmitry Eskin and Iakovos Tzanakis in which new insights into the mechanism of ultrasonic atomization were described stating that the cavitation during the process plays a critical role in the ultrasonic atomization which was also filmed for the first time using high-speed imaging.<ref name=":2">{{Cite journal |last1=Priyadarshi |first1=Abhinav |last2=Bin Shahrani |first2=Shazamin |last3=Choma |first3=Tomasz |last4=Zrodowski |first4=Lukasz |last5=Qin |first5=Ling |last6=Leung |first6=Chu Lun Alex |last7=Clark |first7=Samuel J. |last8=Fezzaa |first8=Kamel |last9=Mi |first9=Jiawei |last10=Lee |first10=Peter D. |last11=Eskin |first11=Dmitry |last12=Tzanakis |first12=Iakovos |date=2024-03-05 |title=New insights into the mechanism of ultrasonic atomization for the production of metal powders in additive manufacturing |url=https://linkinghub.elsevier.com/retrieve/pii/S2214860424000794 |journal=Additive Manufacturing |volume=83 |article-number=104033 |doi=10.1016/j.addma.2024.104033 |issn=2214-8604}}</ref><ref>{{Cite web |last=admin |date=2022-08-10 |title=Ultrasonic atomization principle - AMAZEMET |url=https://www.amazemet.com/ultrasonic-atomization-principle/ |access-date=2024-11-12 |website=AMAZEMET {{!}} Freedom In Metal Additive Manufacturing |language=en-US}}</ref> The sonotrode used in the experiments was made of high-temperature resistant carbon fiber plate to atomize pure aluminum melted at a temperature of 800 °C. The ultrasonic atomizer was also used to atomize magnesium alloy,<ref>{{Cite journal |last1=Dobkowska |first1=Anna |last2=Żrodowski |first2=Łukasz |last3=Chlewicka |first3=Monika |last4=Koralnik |first4=Milena |last5=Adamczyk-Cieślak |first5=Bogusława |last6=Ciftci |first6=Jakub |last7=Morończyk |first7=Bartosz |last8=Kruszewski |first8=Mirosław |last9=Jaroszewicz |first9=Jakub |last10=Kuc |first10=Dariusz |last11=Święszkowski |first11=Wojciech |last12=Mizera |first12=Jarosław |date=2022-12-01 |title=A comparison of the microstructure-dependent corrosion of dual-structured Mg-Li alloys fabricated by powder consolidation methods: Laser powder bed fusion vs pulse plasma sintering |journal=Journal of Magnesium and Alloys |volume=10 |issue=12 |pages=3553–3564 |doi=10.1016/j.jma.2022.06.003 |issn=2213-9567|doi-access=free }}</ref> and metals with melting over 1500 °C such as zirconium alloy,<ref name=":1">{{Cite journal |last1=Żrodowski |first1=Łukasz |last2=Wróblewski |first2=Rafał |last3=Choma |first3=Tomasz |last4=Morończyk |first4=Bartosz |last5=Ostrysz |first5=Mateusz |last6=Leonowicz |first6=Marcin |last7=Łacisz |first7=Wojciech |last8=Błyskun |first8=Piotr |last9=Wróbel |first9=Jan S. |last10=Cieślak |first10=Grzegorz |last11=Wysocki |first11=Bartłomiej |last12=Żrodowski |first12=Cezary |last13=Pomian |first13=Karolina |date=January 2021 |title=Novel Cold Crucible Ultrasonic Atomization Powder Production Method for 3D Printing |journal=Materials |language=en |volume=14 |issue=10 |pages=2541 |bibcode=2021Mate...14.2541Z |doi=10.3390/ma14102541 |issn=1996-1944 |pmc=8153640 |pmid=34068424 |doi-access=free}}</ref> titanium alloy<ref>{{Cite journal |last1=Schönrath |first1=Hanna |last2=Wegner |first2=Jan |last3=Frey |first3=Maximilian |last4=Schroer |first4=Martin A. |last5=Jin |first5=Xueze |last6=Pérez-Prado |first6=María Teresa |last7=Busch |first7=Ralf |last8=Kleszczynski |first8=Stefan |date=2024-06-01 |title=Novel titanium-based sulfur-containing BMG for PBF-LB/M |journal=Progress in Additive Manufacturing |language=en |volume=9 |issue=3 |pages=601–612 |doi=10.1007/s40964-024-00668-z |issn=2363-9520|doi-access=free |hdl=2031/4c7ec4f5-52ee-4bd1-8ac6-823f23b77762 |hdl-access=free }}</ref> and high-entropy alloy.<ref>{{Cite journal |last1=Zavdoveev |first1=Anatoliy |last2=Zrodowski |first2=Łukasz |last3=Vedel |first3=Dmytro |last4=Cortes |first4=Pedro |last5=Choma |first5=Tomasz |last6=Ostrysz |first6=Mateusz |last7=Stasiuk |first7=Oleksandr |last8=Baudin |first8=Thierry |last9=Klapatyuk |first9=Andrey |last10=Gaivoronskiy |first10=Aleksandr |last11=Bevz |first11=Vitaliy |last12=Pashinska |first12=Elena |last13=Skoryk |first13=Mykola |date=2024-05-15 |title=Atomization of the Fe-rich MnNiCoCr high-entropy alloy for spherical powder production |url=https://linkinghub.elsevier.com/retrieve/pii/S0167577X24003781 |journal=Materials Letters |volume=363 |article-number=136240 |doi=10.1016/j.matlet.2024.136240 |bibcode=2024MatL..36336240Z |issn=0167-577X|url-access=subscription }}</ref>
The progression of ultrasonic atomization from early physical observations to reliable processing of molten metals required the resolution of several engineering challenges that are not fully captured by theoretical models alone. Many of the technical solutions that enabled the transition of ultrasonic atomization from laboratory-scale experiments to practical and high-temperature metal processing have been disclosed in patent literature. These documents address key challenges such as ultrasonic stack design, melt–sonotrode interaction, thermal management, resonance stability under variable load, and the integration of external heat sources. A selection of representative patents and technical disclosures relevant to the development of ultrasonic atomization is summarized below.<ref name="Apparatus for atomizing liquids"/><ref>{{Cite patent|number=CN110076346A|title=一种适用于制造金属细粉的超声驻波雾化装置|gdate=2019-08-02|invent1=周红生|invent2=王锦柏|invent3=张东博|url=https://patents.google.com/patent/CN110076346A/en?q=(ultrasonic+metal+atomization)&oq=ultrasonic+metal+atomization}}</ref><ref>{{Cite patent|number=CN113953519A|title=一种热-磁-超声金属雾化制粉系统及方法|gdate=2022-01-21|invent1=陈祯|invent2=张树哲|invent3=姚森|invent4=魏培|url=https://patents.google.com/patent/CN113953519A/en?q=(ultrasonic+metal+atomization)&oq=ultrasonic+metal+atomization}}</ref><ref>{{Cite patent|number=EP4000763A1|title=Ultrasonic metal powder atomizer|gdate=2022-05-25|invent1=Prokic|invent2=ZRODOWSKI|invent3=PUGA|inventor1-first=Miodrag|inventor2-first=Tukasz|inventor3-first=Hélder|url=https://patents.google.com/patent/EP4000763A1/en?q=(atomization+prokic)&oq=atomization+prokic}}</ref><ref>{{Cite patent|number=US20220161353A1|title=Sonotrode for processing of liquid metals and a method for processing of liquid metals|gdate=2022-05-26|invent1=ZRODOWSKI|inventor1-first=Lukasz|url=https://patents.google.com/patent/US20220161353A1/en?q=(lukasz)&inventor=zrodowski&oq=lukasz+zrodowski}}</ref><ref>{{Cite web |title=CN113993642 (A) - A Method For Evacuation Of Powder Produced By Ultrasonic Atomization And A Device For Implementing This Method |url=https://www.patbase.com/familyexplorer/public/index.php?fn=82996675&pn=CN113993642&kd=A |access-date=2025-07-30 |website=www.patbase.com}}</ref><ref>{{Cite web |title=JP2021503044 (T2) - Ultrasonic spray spherical by way a device for producing metal powder. |url=https://www.patbase.com/familyexplorer/public/index.php?fn=74354619&pn=JP2021503044&kd=T2 |access-date=2025-07-30 |website=www.patbase.com}}</ref><ref>{{Cite web |title=KR102539861 (B1) - An apparatus for the production of spherical metal powders by ultrasonic atomization method |url=https://www.patbase.com/familyexplorer/public/index.php?fn=74354619&pn=KR102539861&kd=B1 |access-date=2025-07-30 |website=www.patbase.com}}</ref><ref>{{Cite patent|number=EP4192985A1|title=Ultrasound system for metal and their alloys processing and method of liquid metals and their alloys processing|gdate=2023-06-14|invent1=ZRODOWSKI|inventor1-first=Lukasz|url=https://patents.google.com/patent/EP4192985A1/en?q=(lukasz)&inventor=zrodowski&oq=lukasz+zrodowski}}</ref><ref>{{Cite patent|number=EP3638442A1|title=Device for the manufacturing of spherical metal powders by an ultrasonic atomization method|gdate=2020-04-22|invent1=ZRODOWSKI|invent2=RALOWICZ|invent3=ROZPENDOWSKI|invent4=CZARNECKA|inventor1-first=Lukasz|inventor2-first=Robert|inventor3-first=Jakub|inventor4-first=Katarzyna|url=https://patents.google.com/patent/EP3638442A1/en?q=(lukasz)&inventor=zrodowski&assignee=3D+Lab+Sp.+Z+O.O.}}</ref><ref>{{Cite patent|number=EP3766610A1|title=Sonotrode for ultrasonic atomization of metals and their alloys|gdate=2021-01-20|invent1=KACZYNSKI|invent2=Rukat|invent3=RALOWICZ|invent4=BIELECKI|inventor1-first=Konrad|inventor2-first=Michal|inventor3-first=Robert|inventor4-first=Marcin|url=https://patents.google.com/patent/EP3766610A1/fr?assignee=3D+Lab+Sp.+Z+O.O.&oq=assignee:(3D+Lab+Sp.+Z+O.O.)}}</ref>
== See also == * Mist * Ultrasound * Piezoelectricity * Metal powder * Induction plasma
== References ==
{{reflist}}
Category:Ultrasound