{{short description|Wooden fastener}} thumb|Oak treenails for pinning a wooden structure together. A used one (front center) demonstrates permanent deformation from the forces that bore on it
A '''treenail''', also trenail, trennel, or trunnel, is a wooden peg, pin, or dowel used to fasten pieces of wood together, especially in timber frames, covered bridges, wooden ship- and boat-building.<ref>Edwards, Jay Dearborn, and Nicolas Verton. ''A Creole lexicon architecture, landscape, people''. Baton Rouge: Louisiana State University Press, 2004. Print. 237.</ref> It is driven into a hole bored through two (or more) pieces of structural wood (mortise and tenon).
==History and general use== [[File:Holznägel, Fachwerk, Bandhaus Kloster Blaubeuren.jpg|thumb|Protruding treenails used in timber framing at Blaubeuren Abbey, Germany. c.1478]]
Treenails are extremely economical and readily available, making them a common fastener in early wooden construction,<ref name=":0" /> with use of wood as a tenon traced back over 7,000 years.<ref>{{Cite book|title=Wood: A History|last=Radkau|first=Joachim|publisher=Polity|year=2012|isbn=978-0745646886}} Archaeologist have found traces of wood nails in the excavation of early Germanic sites.</ref>
Due to their strength and rot resistance, black locust is a favorite treenail material in North American shipbuilding<ref>{{Cite book|title=Planking and Fastening|last=Specter|first=Peter|publisher=WoodenBoat Books|year=1996|isbn=9780937822418|pages=66}}</ref><ref>{{Cite book | url=https://books.google.com/books?id=qVUD70nM898C |title = Planking and Fastening|isbn = 9780937822418|last1 = Spectre|first1 = Peter H.|year = 1996| publisher=WoodenBoat Books }}</ref> and English oak in European,<ref>{{Cite book|title=Practical Treatise on the Joints Made and Used by Builders in the Construction of Various Kinds of Engineering and Architectural Works ...|last=Christy|first=Wyville|publisher=C. Lockwood and son|year=1904|pages=99}}</ref><ref>{{Cite web | url=https://books.google.com/books?id=5lcUAQAAMAAJ |title = Practical Treatise on the Joints Made and Used by Builders in the Construction of Various Kinds of Engineering and Architectural Works|last1 = Christy|first1 = Wyville J.|year = 1904}}</ref> while red oak is typically found in buildings. Traditionally treenails and pegs were made by splitting bolts of wood with a froe and shaping them with a drawknife on a shaving horse. They can also be made with a tine-former, a hollow metal tube with a flaring flange on one end and a sharp edge on the other, usually mounted by the flange atop a low bench called a driving stool. Each roughly-shaped bolt of wood, slightly longer than the tool, is placed above the sharp end of the pipe and driven with a wooden mallet, which avoids the cutting edge; the next billet drives the previous the rest of the way through, which falls through a hole in the bench.
Modern treenails are typically {{convert|1.25|-|1.5|in}} in diameter and cut from a single piece of wood. When installed, their grain runs perpendicular to that of the receiving mortises, which adds structural strength. Hand whittled treenails retain rough facets, while those produced mechanically using a tine-former or parsed out of turned billets do not. The mortise is drilled {{convert|1/16|in}} smaller than the treenail to create a tight fit and take advantage of friction in the mortise, with those used in shipbuilding swelling tight when wet, both preventing leaks and strengthening their hold. In cases where the treenail is {{convert|24|in|cm}} or longer, it should be shaped {{convert|1/8|in}} smaller in its first half than the second. Its corresponding mortise is drilled clear through with a small auger, followed by a larger on its first half. Tapered treenails are made longer than their mortise, then driven till tight, with excess on either end trimmed off.<ref>{{Cite book|title=A Maritime Archaeology of Ships: Innovation and Social Change in Late Medieval and Early Modern Europe|last=Adams|first=J.R.|publisher=Oxbow Books|year=2013|isbn=978-1842172971}}</ref> After trimming they may be split and wedged with a small piece of oak on the large end to hold them tightly in place.<ref>{{Cite book|title=The Elements of Wood Ship Construction|url=https://archive.org/details/elementswoodshi00curtgoog|last=Curtis|first=W.H.|publisher=McGraw Hill Book Company|year=1919|location=New York, NY}}</ref> As an alternative to the wedge, the treenail can receive a plug or a punch in its center that expands the entire circumference. While this method minimizes leakage into the wooden planking, plugs and punches are more likely to fall out in cold temperatures.
Unlike metal nails, treenails can not be removed (without great effort) or reused. Cycles of swelling and contacting help lock the mortise snugly. Failed treenails must be bored out and replaced with a larger fastener. {{clarification needed span|text=In addition, treenails have the ability to move over time and retain structural integrity.|date=July 2025}}
== Uses == === In timber framing === [[File:TRUNNELS AND LOWER CHORD DETAILS. - Brown Bridge, Spanning Cold River, Upper Cold River Road, Shrewsbury, Rutland County, VT HAER VT-28-4.tif|thumb|Treenails used in the Brown Bridge in Rutland County, Vermont (2003)]] {{expand section|treenail use in timber framing beyond truss construction|date=July 2025}}
Early mortise and tenon trusses with spans of less than {{Convert | 30 | ft | 0}} used treenail fasteners. When used in a truss, the connecting mortises are drilled off center such that when the treenail is inserted it creates a tighter joint. Because of the large number of treenails required in a truss, the treenails can be turned on a lathe with a head and a tapered end, often kept extra-long for the tightest fit. The bottom chord often requires 2–3 pegs and is the weakest part of the truss. Hence the treenail can not prevent failure in spans of over {{Convert | 30 | ft | 0}}. In cases where significant shrinkage may occur, it may be necessary to use iron U-straps or reinforcements.<ref>{{Cite journal|last=Nelson|first=Lee H.|date=1996|title=Early Wooden Truss Connections vs. Wood Shrinkage: From Mortise-and-Tenon Joints to Bolted Connections|jstor=1504495|journal=APT Bulletin|volume=27|issue=1/2|pages=11–23|doi=10.2307/1504495}}</ref>
=== In ships === {{See also|Lashed-lug boat|Sewn boat|Treenailed boat|Mtepe}} [[Image:Trenails.jpg|thumb|Treenail used to fasten planking to frames, with red lead paint for waterproofing, Qui Nhơn, Vietnam]][[File:Building the Naga Pelangi - fitting the first plank.jpg|thumb|Building the Naga Pelangi, a wooden junk rigged schooner. Fitting the first plank required aligning many treenails]]
Ancient shipbuilding used treenails to bind the boat together. They had the advantage of not giving rise to "nail-sickness", a term for decay accelerated and concentrated around metal fasteners. Increased water content causes wood to expand, so that treenails gripped the planks tighter as they absorbed water.<ref>Kettunen, P. O., ''Wood Structure and Properties''. Uetikon-Zuerich: Trans Tech Publications, 2006. 377. Print.</ref> However, when the treenail was a different wood species from the planking, it usually caused rot. Treenails and iron nails were most common until the 1780s when copper nails over copper sheathing became more popular.<ref name=":0">{{Cite journal|last=Johnson|first=W.|date=1986-01-01|title=Historical and present-day references concerning impact on wood|journal=International Journal of Impact Engineering|volume=4|issue=3|pages=161–174|doi=10.1016/0734-743X(86)90003-5 |bibcode=1986IJIE....4..161J }}</ref> As late as the 1870s, merchant ships used treenails and iron bolts, while higher quality ships used copper and yellow metal bolts and dumps. In the 1870s, treenails were typically used in a ratio of four treenails to one bolt, although sometimes more bolts were used. In later corvettes, the ratio was changed to two treenails to one bolt.<ref>{{Cite book|url=https://archive.org/details/navalarchitectu00theagoog|page=[https://archive.org/details/navalarchitectu00theagoog/page/n236 232]|quote=wood architecture treenails.|title=Naval Architecture: A Treatise on Laying Off and Building Wood, Iron, and Composite Ships|last=Thearle|first=Samuel James Pope|date=1876|publisher=W. Collins, Sons & Company|language=en}}</ref>
=== In railroads === Similar wooden treenail fastenings were used as alternatives to metal spikes to secure iron rail-support chairs to wooden sleepers (ties) in early Victorian railroads. Treenails were extensively used constructing railways in North England.<ref>{{Cite book|url=https://books.google.com/books?id=8w-LRWovDb4C&q=wood+architecture+treenails&pg=PA236|title=The Civil engineer & [and] architect's journal|date=1841|publisher=Kent|language=en}}</ref>
=== In furniture === {{expand section|date=July 2025}} Treenails are typically referred to as "dowels" when used in furniture construction, which may or may not involve tapering, and sometimes are found with decorative through-pinning of extended ends.
==References== {{reflist}}
{{Woodworking}}
Category:Woodworking Category:Shipbuilding Category:Timber framing