{{short description|Increasing processor speed beyond specification}} {{Use American English|date=February 2023}} {{Use mdy dates|date=February 2023}} [[Image:Overclock.jpg|thumb|upright=1.5|A computer BIOS on an ABIT NF7-S motherboard with an overclocked AMD Athlon XP CPU, running at 2,442 MHz<!-- Routine calculation: 148MHz x 16.5 = 2442MHz. -->]] In computing, '''overclocking''' is the practice of increasing the clock rate of a semiconductor device, such as a processor, beyond its rated speed, potentially increasing its performance.<ref>{{Cite web |title=What is Overclocking? Examining Pros and Cons |url=https://uk.crucial.com/articles/about-memory/what-is-overclocking |access-date=2025-08-09 |website=Crucial |language=en-gb |archive-date=August 22, 2025 |archive-url=https://web.archive.org/web/20250822175024/https://uk.crucial.com/articles/about-memory/what-is-overclocking |url-status=live }}</ref> Overclocked devices, however, may have shorter lifespans, become unstable and unreliable, and in extreme cases, be permanently damaged. Many manufacturers do not cover damage from overclocking in their warranties, while some allow it inside a predefined safety margin.
== Overview ==
A semiconductor device's processing speed depends on a variety of factors, including, but not limited to, its clock speed, microarchitecture, the kind of software it's running, and the bandwidth, latency and size for each level of its memory. All else being equal, a faster-clocked device can, though not necessarily, perform faster. <!-- This paragraph is worded somewhat conservatively to account for the fact that a chip's performance can be bottlenecked by other factors. If said bottleneck is extreme enough, the performance improvement from overclocking would reduce proportionally (until there's no performance improvement left). The first sentence is written in this way to imply that a processor may not benefit from higher clocks if it's running crap software, have terribly small / slow memory, or that the software given to it is poorly suited / poorly optimized to the chip's microarchitecture; an example for the lattermost point is to run strictly serial branching codes (a sea of if-elses) on a GPU. -->Operating voltage is often increased to maintain a component's operational stability at accelerated speeds. Operating at higher frequencies and voltages increase power consumption and heat.<ref name=":0">{{Cite journal |last=Jang |first=Hyung Beom |last2=Lee |first2=Junhee |last3=Kong |first3=Joonho |last4=Suh |first4=Taeweon |last5=Chung |first5=Sung Woo |date=May 2014 |title=Leveraging Process Variation for Performance and Energy: In the Perspective of Overclocking |url=https://ieeexplore.ieee.org/abstract/document/6374616 |journal=IEEE Transactions on Computers |volume=63 |issue=5 |pages=1316–1322 |doi=10.1109/TC.2012.286 |issn=1557-9956 |quote=VF-overclocking [increases] power consumption [as it] is proportional to the clock frequency and the supply voltage squared. [Excessive] switching in transistors from [such overclocking also increases] the temperature of microprocessors [incurring] reliability loss.|url-access=subscription }}</ref> Overclocking a device introduces additional risks of failure, for example, by overheating when the increased heat load is not removed,<ref name=":0" /> or by the device requesting more power than its power supply can provide.{{cn|date=November 2025}}
=== Underclocking === {{Main|Underclocking}}
'''Underclocking''' or '''downclocking''' is the practice of lowering a device's clock rate to below its default. An underclocked device trades lowered performance for reductions in power consumption and heat output. Such a device can potentially be cooled with less capable heatsinks, or, if present at all, slower rotating fans for quieter operation. For devices powered by a battery, e.g., smartphones and laptops, underclocking can be used to lower power consumption and extend battery life; some devices underclock themselves automatically when operating under battery power.<ref>{{cite web |title=What is an underclock? |url=https://www.lenovo.com/us/en/glossary/underclock/ |website=Lenovo |access-date=19 March 2025}}</ref>
Underclocking and undervolting would be attempted on a desktop system to have it operate silently (such as for a home entertainment center) while potentially offering higher performance than currently offered by low-voltage processor offerings. This would use a "standard-voltage" part and attempt to run with lower voltages (while attempting to keep the desktop speeds) to meet an acceptable performance/noise target for the build. This was also attractive as using a "standard voltage" processor in a "low voltage" application avoided paying the traditional price premium for an officially certified low voltage version. However again like overclocking there is no guarantee of success, and the builder's time researching given system/processor combinations and especially the time and tedium of performing many iterations of stability testing need to be considered. The usefulness of underclocking (again like overclocking) is determined by what processor offerings, prices, and availability are at the specific time of the build. Underclocking is also sometimes used when troubleshooting.<ref>{{cite web |title=What is an underclock? |url=https://www.lenovo.com/us/en/glossary/underclock/ |website=Lenovo |access-date=19 March 2025}}</ref>
=== Enthusiast culture ===
Overclocking has become more accessible with motherboard makers offering overclocking as a marketing feature on their mainstream product lines. However, the practice is embraced more by enthusiasts than professional users, as overclocking carries a risk of reduced reliability, accuracy and damage to data and equipment. Additionally, most manufacturer warranties and service agreements do not cover overclocked components nor any incidental damages caused by their use. While overclocking can still be an option for increasing personal computing capacity, and thus workflow productivity for professional users, the importance of stability testing components thoroughly ''before'' employing them into a production environment cannot be overstated.
Overclocking offers several draws for overclocking enthusiasts. Overclocking allows testing of components at speeds not currently offered by the manufacturer, or at speeds only officially offered on specialized, higher-priced versions of the product. A general trend in the computing industry is that new technologies tend to debut in the high-end market first, then later trickle down to the performance and mainstream market. If the high-end part only differs by an increased clock speed, an enthusiast can attempt to overclock a mainstream part to simulate the high-end offering. This can give insight on how over-the-horizon technologies will perform before they are officially available on the mainstream market, which can be especially helpful for other users considering if they should plan ahead to purchase or upgrade to the new feature when it is officially released.
Some hobbyists enjoy building, tuning, and "Hot-Rodding" their systems in competitive benchmarking competitions, competing with other like-minded users for high scores in standardized computer benchmark suites. Others will purchase a low-cost model of a component in a given product line, and attempt to overclock that part to match a more expensive model's stock performance. Another approach is overclocking older components to attempt to keep pace with increasing system requirements and extend the useful service life of the older part or at least delay purchase of new hardware solely for performance reasons. Another rationale for overclocking older equipment is even if overclocking stresses equipment to the point of failure earlier, little is lost as it is already depreciated, and would have needed to be replaced in any case.<ref>{{cite book | title = The Book of Overclocking | first1 = Scott | last1 = Wainner | first2 = Robert |last2=Richmond | pages = [https://archive.org/details/bookofoverclocki0000wain/page/1 1–2] | isbn = 978-1-886411-76-0 | publisher = No Starch Press | year = 2003 | url = https://archive.org/details/bookofoverclocki0000wain/page/1 }}</ref>
== Factors == === Cooling === {{Main|Computer cooling}}
[[Image:Copper heat sink with pipes.jpg|thumb|High-quality heat sinks are often made of copper.]]
While stock cooling systems are commonly designed for heat produced during non-overclocked use, they may not be adequate for overclocked parts. These may include the use of additional and more powerful fans, larger and more efficient heat sinks, heat pipes, or the use of water cooling.
==== Heat sinks ==== {{Main|Heat sink}}
Heat sinks are passive heat exchangers designed to take away excessive heat generated by the device it is in physical contact with. They are commonly made with copper or aluminum, with copper having higher thermal conductivity, and aluminum being less efficient but also cheaper.<ref name="Wainner38">{{cite book | title = The Book of Overclocking | first1 = Scott | last1 = Wainner | first2 = Robert |last2=Richmond | page = [https://archive.org/details/bookofoverclocki0000wain/page/38 38] | isbn = 978-1-886411-76-0 | publisher = No Starch Press | year = 2003 | url = https://archive.org/details/bookofoverclocki0000wain/page/38 }}</ref> Heat pipes can be used to improve conductivity. Many heatsinks combine two or more materials to achieve a balance between performance and cost.<ref name="Wainner38" />
[[File:DIY PC watercooling T-Line.JPG|Interior of a water-cooled computer, showing CPU water block, tubing, and pump|left|thumb]]
[[Image:2007TaipeiITMonth IntelOCLiveTest Overclocking-6.jpg|right|thumb|Liquid nitrogen may be used for cooling an overclocked system, when an extreme measure of cooling is needed.]]
Other cooling methods are forced convection and phase transition cooling which is used in refrigerators and can be adapted for computer use. Liquid nitrogen, liquid helium, and dry ice are used as coolants in extreme cases,<ref name=Wainner44>{{cite book | title = The Book of Overclocking | first1 = Scott | last1 = Wainner | first2 = Robert |last2=Richmond | page = [https://archive.org/details/bookofoverclocki0000wain/page/44 44] | isbn = 978-1-886411-76-0 | publisher = No Starch Press | year = 2003 | url = https://archive.org/details/bookofoverclocki0000wain/page/44 }}</ref> such as record-setting attempts or one-off experiments rather than cooling an everyday system. In June 2006, IBM and Georgia Institute of Technology jointly announced a new record in silicon-based chip clock rate (the rate a transistor can be switched at, not the CPU clock rate<ref>{{cite web|last=Stokes|first=Jon|title=IBM's 500GHz processor? Not so fast…|url=https://arstechnica.com/uncategorized/2006/06/7117-2/|website=Ars Technica|date=22 June 2006|access-date=14 June 2017|archive-date=20 October 2017|archive-url=https://web.archive.org/web/20171020190922/https://arstechnica.com/uncategorized/2006/06/7117-2/|url-status=live}}</ref>) above 500 GHz, which was done by cooling the chip to {{Convert|4.5|K|C F|1|lk=on}} using liquid helium.<ref>{{cite web| last = Toon| first = John| date = 20 June 2006| url = http://gtresearchnews.gatech.edu/georgia-techibm-team-demonstrates-first-500-ghz-silicon-germanium-transistors/| title = Georgia Tech/IBM Announce New Chip Speed Record| publisher = Georgia Institute of Technology| access-date = 2 February 2009| url-status = dead| archive-url = https://web.archive.org/web/20100701230256/http://gtresearchnews.gatech.edu/georgia-techibm-team-demonstrates-first-500-ghz-silicon-germanium-transistors/| archive-date = 1 July 2010}}</ref> The current CPU frequency world record is 9,206.34 MHz, achieved in May 2026 with an Intel Core i9-14900KF on an ASUS ROG Maximus Z790 APEX mainboard.<ref>{{Cite web |last=Mujtaba |first=Hassan |date=2026-05-16 |title=Intel Core i9-14900KF Achieves 9.2 GHz, The Fastest CPU Frequency Ever Recorded |url=https://wccftech.com/intel-core-i9-14900kf-achieves-9-2-ghz-the-fastest-cpu-frequency-ever-recorded/ |access-date=2026-05-22 |website=Wccftech |language=en-US}}</ref> These extreme methods are generally impractical in the long term, as they require refilling reservoirs of vaporizing coolant, and condensation can form on chilled components.<ref name=Wainner44/> Moreover, silicon-based junction gate field-effect transistors (JFET) will degrade below temperatures of roughly {{convert|100|K|C F|0}} and eventually cease to function or "freeze out" at {{convert|40|K|C F|0}} since the silicon ceases to be semiconducting,<ref>{{cite web | title = Extreme-Temperature Electronics: Tutorial – Part 3 | url = http://www.extremetemperatureelectronics.com/tutorial3.html | year = 2003 | access-date = 2007-11-04 | archive-date = 2012-03-06 | archive-url = https://web.archive.org/web/20120306214055/http://www.extremetemperatureelectronics.com/tutorial3.html | url-status = live }}</ref> so using extremely cold coolants may cause devices to fail. Blowtorch is used to temporarily raise temperature to issues of over-cooling when not desirable.<ref>{{Cite news |author1=Wes Fenlon |date=2017-06-09 |title=Overclocking a CPU to 7 GHz with the science of liquid nitrogen |language=en |work=PC Gamer |url=https://www.pcgamer.com/overclocking-a-cpu-to-7-ghz-with-the-science-of-liquid-nitrogen/ |access-date=2023-11-12 |archive-date=November 12, 2023 |archive-url=https://web.archive.org/web/20231112114914/https://www.pcgamer.com/overclocking-a-cpu-to-7-ghz-with-the-science-of-liquid-nitrogen/ |url-status=live }}</ref><ref>{{Cite web |date=2019-08-08 |title=Overclocking to 7GHz takes more than just liquid nitrogen |url=https://www.engadget.com/2017-06-04-gskill-hwbot-overclocking-workshop-7ghz-computex.html |access-date=2023-11-12 |website=Engadget |language=en-US |archive-date=November 12, 2023 |archive-url=https://web.archive.org/web/20231112114914/https://www.engadget.com/2017-06-04-gskill-hwbot-overclocking-workshop-7ghz-computex.html |url-status=live }}</ref>
Submersion cooling, used by the Cray-2 supercomputer, involves sinking a part of a computer system directly into a chilled liquid that is thermally conductive but has low electrical conductivity. The advantage of this technique is that no condensation can form on components.<ref name=Wainner48/> A good submersion liquid is Fluorinert made by 3M, which is expensive. Another option is mineral oil, but impurities such as those in water might cause it to conduct electricity and damage components via short circuits.<ref name=Wainner48>{{cite book | title = The Book of Overclocking | first = Scott | last = Wainner | author2 = Robert Richmond | page = [https://archive.org/details/bookofoverclocki0000wain/page/48 48] | isbn = 978-1-886411-76-0 | publisher = No Starch Press | year = 2003 | url = https://archive.org/details/bookofoverclocki0000wain/page/48 }}</ref>
Amateur overclocking enthusiasts have used a mixture of dry ice and a solvent with a low freezing point, such as acetone or isopropyl alcohol.<ref>{{cite web |url=https://www.techpowerup.com/forums/threads/overclocking-with-dry-ice.101545/ |title=overclocking with dry ice! |work=TechPowerUp Forums |date=August 13, 2009 |access-date=January 7, 2020 |archive-date=December 7, 2019 |archive-url=https://web.archive.org/web/20191207134408/https://www.techpowerup.com/forums/threads/overclocking-with-dry-ice.101545/ |url-status=live }}</ref> This cooling bath, often used in laboratories, achieves a temperature of {{convert|−78|C}}.<ref>[http://chemwiki.ucdavis.edu/VV_Lab_Techniques/Cooling_baths Cooling baths – ChemWiki] {{Webarchive|url=https://web.archive.org/web/20120828144459/http://chemwiki.ucdavis.edu/VV_Lab_Techniques/Cooling_baths|date=2012-08-28}}. Chemwiki.ucdavis.edu. Retrieved on 2013-06-17.</ref>
=== Stability and reliability === {{See also|Stress testing#Hardware}}
As an overclocked component operates outside of the manufacturer's recommended operating conditions, it may function incorrectly, leading to system instability. Another risk is silent data corruption by undetected errors. Such failures might never be correctly diagnosed and may instead be incorrectly attributed to software bugs in applications, device drivers, or the operating system. Overclocked use may permanently damage components enough to cause them to misbehave (even under normal operating conditions) without becoming totally unusable.
A large-scale 2011 field study of hardware faults causing a system crash for consumer PCs and laptops showed a four to 20 times increase (depending on CPU manufacturer) in system crashes due to CPU failure for overclocked computers over an eight-month period.<ref>{{cite conference|url=http://research.microsoft.com/pubs/144888/eurosys84-nightingale.pdf|title=Cycles, cells and platters: an empirical analysis of hardware failures on a million consumer PCs.|conference=Proceedings of the sixth conference on Computer systems (EuroSys '11).|pages=343–356|year=2011|access-date=2012-12-05|archive-date=2012-11-14|archive-url=https://web.archive.org/web/20121114111006/http://research.microsoft.com/pubs/144888/eurosys84-nightingale.pdf|url-status=live}}</ref>
In general, overclockers claim that testing can ensure that an overclocked system is stable and functioning correctly. Although software tools are available for testing hardware stability, it is generally impossible for any private individual to thoroughly test the functionality of a processor.<ref>{{cite journal | citeseerx = 10.1.1.62.9086 | title = Coverage Metrics for Functional Validation of Hardware Designs | journal = IEEE Design & Test of Computers | year = 2001 | first1 = Serdar |last1=Tasiran |first2=Kurt |last2=Keutzer | volume = 18 | issue = 4 | page = 36 | doi = 10.1109/54.936247 | bibcode = 2001IDTC...18...36T }}</ref>
Some semiconductor manufacturing techniques, like the silicon on insulator (SOI), produce devices with hysteresis behavior. These circuit's performance is affected by the events of the past, so without carefully targeted tests it is possible for a particular sequence of state changes to work at overclocked rates in one situation but not another even if the voltage and temperature are the same. Such a system may pass stress tests yet experiences instabilities in other programs.<ref>{{cite web | url = http://blogs.msdn.com/oldnewthing/archive/2005/04/12/407562.aspx | first = Raymond | last = Chen | title = The Old New Thing: There's an awful lot of overclocking out there | date = April 12, 2005 | access-date = 2007-03-17 | archive-date = 2007-03-08 | archive-url = https://web.archive.org/web/20070308074036/http://blogs.msdn.com/oldnewthing/archive/2005/04/12/407562.aspx | url-status = dead }}</ref>
=== Factors impacting overclocking potential === Overclockability arises in part due to the economics of the manufacturing processes of CPUs and other components. In many cases components are manufactured by the same process, and tested after manufacture to determine their actual maximum ratings. Components are then marked with a rating chosen by the market needs of the semiconductor manufacturer. If manufacturing yield is high, more higher-rated components than required may be produced, and the manufacturer may mark and sell higher-performing components as lower-rated for marketing reasons. In some cases, the true maximum rating of the component may exceed even the highest rated component sold. Many devices sold with a lower rating may behave in all ways as higher-rated ones, while in the worst case operation at the higher rating may be more problematical.
Notably, higher clocks must always mean greater waste heat generation, as semiconductors set to high must dump to ground more often. In some cases, this means that the chief drawback of the overclocked part is far more heat dissipated than the maximums published by the manufacturer. Pentium architect Bob Colwell calls overclocking an "uncontrolled experiment in better-than-worst-case system operation".<ref>{{cite journal|first1=Bob|last1=Colwell|title=The Zen of Overclocking|journal=Computer|volume=37|issue=3|date=March 2004|pages=9–12|publisher=Institute of Electrical and Electronics Engineers|doi=10.1109/MC.2004.1273994|bibcode=2004Compr..37c...9C |s2cid=21582410}}</ref>
== Manufacturer and vendor ==
=== Factory overclocking === Overclocking is sometimes offered as a legitimate service or feature for consumers, in which a manufacturer or retailer tests the overclocking capability of processors, memory, video cards, and other hardware products. Several video card manufactures now offer factory-overclocked versions of their graphics accelerators, complete with a warranty, usually at a price intermediate between that of the standard product and a non-overclocked product of higher performance.
It is speculated that manufacturers implement overclocking prevention mechanisms such as CPU multiplier locking to prevent users from buying lower-priced items and overclocking them. These measures are sometimes marketed as a consumer protection benefit, but are often criticized by buyers.
Many motherboards are sold, and advertised, with extensive facilities for overclocking implemented in hardware and controlled by BIOS settings.<ref>{{Cite web|url=https://www.asus.com/Motherboards/AMD_AM3Plus/M5A78LUSB3/|title=｜｜ASUS Global|website=ASUS Global|access-date=2021-05-10|archive-date=2021-05-10|archive-url=https://web.archive.org/web/20210510170944/https://www.asus.com/Motherboards/AMD_AM3Plus/M5A78LUSB3/|url-status=live}}</ref>
== Advantages == The most common practical purpose of overclocking is to increase framerates in videogames, thus improving smoothness and reducing latency, and less commonly to improve performance in other intensive workloads or generally. Overclocking may also be a cheaper alternative to replacing existing hardware, or simply serve as a hobby.
== Disadvantages ==
=== Noise === {{See also|Health effects from noise}} Fans running at higher speeds generate additional noise. The increased heat output from an overclocked device might require faster-spinning fans to be adequately cooled. Depending on the speed, model and numbers of fans used, these noise can reach 50 dB or higher, causing annoyance or even mental distress. Fan noise has been found to be roughly proportional to the fifth power of fan speed, and halving speed reduces noise by about 15 dB.<ref>{{Cite web |title=UK Health and Safety Executive: Top 10 noise control techniques |url=http://www.hse.gov.uk/pubns/top10noise.pdf |url-status=live |archive-url=https://web.archive.org/web/20191126163348/http://www.hse.gov.uk/pubns/top10noise.pdf |archive-date=2019-11-26 |access-date=2011-12-30}}</ref>
=== Reliability === An overclocked computer may suffer from instability and behave erratically. This can include inconsistent performance (throttling), abrupt shutdown and reboots due to overheat, overvoltage or overcurrent, data loss and data corruption.
=== Hardware damage === Increasing the operation frequency of a component will usually increase its thermal output in a linear fashion, while an increase in voltage usually causes thermal power to increase quadratically.<ref>{{Cite book |last=Darche |first=Philippe |url=https://books.google.com/books?id=XeQGEAAAQBAJ&dq=power+wall+&pg=PA128 |title=Microprocessor 3: Core Concepts – Hardware Aspects |date=2020-11-02 |publisher=John Wiley & Sons |isbn=978-1-119-78800-3 |language=en}}</ref>
== Graphics processing units ==
[[File:Bfg geforce 6800 gs oc.jpg|thumb|200px|right|This BFG-made GeForce 6800GS graphics card has higher memory and clock rates than standard ones out-of-the-box.]] Graphics processing units (GPUs), like all semiconductor devices, can also have overclocking headroom and the ability to be overclocked. <!-- Which we should not omit the legendary MSI Afterburner - and we should also have a screenshot of it here. --> Some graphics card are factory overclocked - the GPU, framebuffer, and both may run at faster speeds than their standard counterparts (e.g., reference designs), without any configuration.
== See also ==
{{Portal|Electronics}}
{{Div col|colwidth=20em}} * CPU-Z, a software used to display CPU-related info * Double boot, a BIOS feature used to implement hardware settings from the user (e.g., overclocked settings) * Dynamic voltage scaling * POWER8 on-chip controller (OCC) * Serial presence detect (SPD) * Super PI, a CPU benchmarking suite * UNIVAC I Overdrive, 1952 unofficial modification {{div col end}}
== References ==
{{Reflist|33em}} ;Notes *{{cite journal | first = Bob | last = Colwell | author-link = Bob Colwell | title = The Zen of Overclocking | journal = Computer | volume = 37 | issue = 3 | pages = 9–12 |date=March 2004 | doi = 10.1109/MC.2004.1273994| bibcode = 2004Compr..37c...9C | s2cid = 21582410 }} *{{Cite journal |last1=Åkerblom |first1=Niklas |last2=Hoseini |first2=Fazeleh Sadat |last3=Chehreghani |first3=Morteza Haghir |year=2023 |title=Online learning of network bottlenecks via minimax paths |journal=Machine Learning |volume=112 |pages=131–150 |doi=10.1007/s10994-022-06270-0|doi-access=free |arxiv=2109.08467 }}
== External links ==
{{wikibooks|How To Build A Computer|Optimizing and Overclocking}} *{{Commons category-inline|Overclocking}} <!--PLEASE NO FORUMS, LINKS WITHOUT DISCUSSION OR COMMERCIAL SITES, THEY WILL BE REMOVED--> * [http://www.ocinside.de/html/workshop/amd_socketa_overclock.html OverClocked inside] * [http://www.wikihow.com/Overclock-a-PC How to Overclock a PC], WikiHow * [http://www.ethernetworks.de/imac_g4_usb2_overclocking.html Overclocking guide for the Apple iMac G4 main logic board]
=== Overclocking and benchmark databases ===
*[http://www.xtremesystems.org OC Database of all PC hardware for the past decade] (applications, modifications and more) *[http://www.hwbot.org HWBOT: Worldwide Overclocking League – Overclocking competition and data] *[http://www.forum-inside.de/cgi-bin/forum/ocdatabase_e.cgi Comprehensive CPU OC Database] * [https://web.archive.org/web/20110624071633/http://imperiogamer.com/index.php/juegos/noticias/item/2367-segunda-convencion-nacional-de-oc-overclocking-extremo- Segunda Convencion Nacional de OC: Overclocking Extremo] by Imperio Gamer *[http://www.hwmaster.com/forum/tools-utili-per-loverclock-t168.html Tool for overclock] {{Computer processor power management technologies}}
Category:Computer hardware tuning Category:Clock signal Category:Hobbies Category:IBM PC compatibles