{{No footnotes|date=June 2024}} {{Infobox locomotive | name = PLM 241.C | image = ETH-BIB-Schnellzuglokomotive PLM 241 C1-Ans 15671-05-059-AL-FL.tif | alt = | caption = The 241.C.1 in 1932. | powertype = Steam | designer = | builder = Schneider et Cie | ordernumber = | serialnumber = 4530 | buildmodel = | builddate = December 1930 | totalproduction = 1 | rebuilder = | rebuilddate = | numberrebuilt = | whytetype = 4-8-2 | uicclass = 2′D1′ h4v | driver = <!-- e.g. 1st, 2nd or 3rd coupled axle --> | gauge = <!-- {{track gauge|sg}} --> | leadingdiameter = {{convert|1000|mm|ftin|frac=8|abbr=on}} | driverdiameter = {{convert|2000|mm|ftin|frac=8|abbr=on}} | trailingdiameter = {{convert|1360|mm|ftin|frac=8|abbr=on}} | tenderdiameter = <!-- tender wheel diameter --> | minimumcurve = | wheelbase = | engine total = | leading = | drivers = <!-- USA terminology --> | coupled = <!-- British terminology --> | trailing = | tender total = | tendertruck = <!-- USA terminology --> | tenderbogie = <!-- British terminology --> | pivotcentres = <!-- Garratts, diesels and electrics --> | wheelspacing = <!-- coupled wheels with asymmetrical wheel spacing --> | length = ''Loco:'' {{convert|17100|mm|ftin|frac=8|abbr=on}} | over couplers = | over bufferbeams= | width = | height = | frametype = | axleload = | leadingbogie/pony= <!-- load on leading bogie or pony wheel --> | coupled all = <!-- when the load on all coupled wheels are the same --> | coupled 1 = <!-- load on 1st coupled wheel --> | coupled 2 = <!-- load on 2nd coupled wheel --> | coupled 3 = <!-- etc. --> | coupled 4 = | trail bogie/pony= <!-- load on trailing bogie or pony wheel --> | tenderbogieload = <!-- load per tender bogie, use "Truck 1:<br>Bogie 2:" if different --> | tenderaxle = <!-- use "Axle 1:", etc with "<br>" for line breaks --> | weightondrivers = | locoweight = {{ubl|''Empty:'' {{convert|113.4|t}}|''Loaded:'' {{convert|126.6|t}}}} | tenderweight = | locotenderweight = | tendertype = | fueltype = Coal | fuelcap = | watercap = | tendercap = | sandcap = | fireboxtype = <!-- Round-top, Belpaire, combustion chamber, etc. --> | firearea = {{convert|5.06|m2|abbr=on}} | boiler = <!-- Watson Standard no. x, etc --> | boilertype = <!-- Domeless, etc --> | pitch = <!-- height of boiler centreline above the railhead --> | diameterinside = | lengthinside = <!-- distance between tube plates --> | smalltubediameter= <!-- number of boiler tubes and their outside diameter --> | largetubediameter= <!-- number of larger tubes (flues), if any, and their outside diameter --> | boilerpressure = {{convert|20|kg/cm2|MPa psi|sigfig=3|abbr=on}} | safetyvalvetype = <!-- Salter spring balance, Ramsbottom, Pop, etc. --> | feedwaterheater = | totalsurface = {{convert|248|m2|abbr=on}} | tubearea = | archarea = | fluearea = | tubesandflues = | fireboxarea = | superheatertype = 33-element | superheaterarea = {{convert|90.9|m2|abbr=on}} | cylindercount = Four, compound: high pressure inside, low pressure outside | hpcylindersize = {{convert|450|x|650|mm|in|frac=16|abbr=on}} | lpcylindersize = {{convert|680|x|700|mm|in|frac=16|abbr=on}} | valvegear = | valvetype = | valvetravel = | valvelap = | valvelead = | transmission = | trainheating = | locobrakes = | locobrakeforce = | trainbrakes = | safety = | coupling = | maxspeed = {{convert|120|km/h|mph|0|abbr=on}} | poweroutput = | tractiveeffort = | factorofadhesion = | operator = {{ubl|Chemins de fer de Paris à Lyon et à la Méditerranée|SNCF}} | operatorclass = | powerclass = | numinclass = | fleetnumbers = 241.C.1 | officialname = | nicknames = | axleloadclass = | locale = | deliverydate = | firstrundate = | lastrundate = | retiredate = 1960 | preservedunits = | restoredate = | scrapdate = 1962 | currentowner = | disposition = | notes = }} '''PLM 241.C.1''' was a French four-cylinder 4-8-2 (''Mountain'') compound steam locomotive, built as a prototype for the Chemins de fer de Paris à Lyon et à la Méditerranée.

The firm of Schneider et Cie took charge of the construction of the locomotive in 1930.

It was based on the earlier PLM 241.A, but with several modifications to increase the design speed from {{convert|110|to|120|km/h}}: * The diameter of the driving wheels was increased from {{convert|1790|to|2000|mm|ftin|frac=8|abbr=on}}; * The crankshaft was modified, and the connecting rods were now attached to the second and third pairs of driving wheels whereas on the 241.A they were attached to the first and second; this necessitated the inside high pressure cylinders be located between the first and second driving axles;

In addition the steam dome was moved forward to be just behind the chimney.

In 1932, the single PLM ''trefle'' exhaust was replaced by a double cross-type. A standard smokebox door replaced the paraboloid-shaped original and smoke deflectors were added at the same time.

The locomotive passed to the SNCF in 1938, who renumbered it 5-241.C.1.

It was retired in 1960, and scrapped two years later, having outlasted the other PLM mountains by a decade; despite it being the only member of its type, although it did form the basis of the SNCF 241.P. Some of its features were integrated into the fifty 241.D and the one 241.E rebuilds of the PLM 241.A locomotives.

<gallery widths="300"> PLM_241_C_1-plan_1925.jpg|The 241.C.1 in 1925. PLM_241_C_1-plan_1932.jpg|The 241.C.1 in 1932. </gallery>

== Models == The PLM 241.C.1 has been reproduced in HO scale by: * La Maison des trains – metal body often mounted on a commercial chassis from Jouef, Fleischmann or Märklin; * Jouef Club in 1991 – limited edition; * Loco-diffusion – as a brass kit.

== References == {{reflist}} *{{Davies-PLMLocoList|page=253}}

Category:Steam locomotives of France Category:Schneider locomotives Category:4-8-2 locomotives Category:Railway locomotives introduced in 1938 Category:2′D1′ h4v locomotives