{{Short description|Class of South African rack 4-6-4T locomotives}} {{Use dmy dates|date=September 2024}} {{Use South African English|date=September 2013}} {{Infobox locomotive | name = CSAR Rack 4-6-4RT | image = CSAR Rack 4-6-4T no. 996.jpg | alt = | caption = CSAR rack locomotive no. 996, c. 1906 | hatnote = | powertype = Steam | designer = [[Central South African Railways]]<br>(P.A. Hyde) | builder = [[Vulcan Foundry]] | ordernumber = | serialnumber = 1942-1943 | buildmodel = CSAR Rack | builddate = 1905 | totalproduction = 2 | rebuilder = Central South African Railways | rebuilddate = 1906 | numberrebuilt = 2 | whytetype = {{Whyte|4-6-4|RT}} (Baltic) | uicclass = 2′C2′ n4t as built<br>2′C2′ n2t modified | driver = 2nd coupled axle | gauge = {{Track gauge|Cape|allk=on}} | leadingdiameter = {{convert|30|in|mm|0|abbr=on}} | coupleddiameter = {{convert|42+1/4|in|mm|0|abbr=on}} | trailingdiameter = {{convert|30|in|mm|0|abbr=on}} | tenderdiameter = | minimumcurve = | wheelbase = {{convert|33|ft|7|in|mm|0|abbr=on}} | engine total = | leading = {{convert|6|ft|4|in|mm|0|abbr=on}} | coupled = {{convert|12|ft|9|in|mm|0|abbr=on}} | trailing = {{convert|6|ft|4|in|mm|0|abbr=on}} | tender total = | tenderbogie = | pivotcentres = | wheelspacing = '''1-2:''' {{convert|8|ft|3|in|mm|0|abbr=on}}<br>'''2-3:''' {{convert|4|ft|6|in|mm|0|abbr=on}} | length = | over couplers = {{convert|41|ft|5|in|mm|0|abbr=on}} | over bufferbeams = | width = | height = {{convert|13|ft|mm|0|abbr=on}} | frametype = [[Locomotive frame#Plate frames|Plate]] | axleload = {{convert|15|lt|15|lcwt|kg|sigfig=4|abbr=on}} | leadingbogie/pony= {{convert|18|lt|kg|sigfig=4|abbr=on}} | coupled all = {{convert|15|lt|15|lcwt|kg|sigfig=4|abbr=on}} | coupled 1 = | coupled 2 = | coupled 3 = | coupled 4 = | coupled 5 = | coupled 6 = | coupled 7 = | coupled 8 = | trail bogie/pony = {{convert|19|lt|kg|sigfig=4|abbr=on}} | tenderbogieload = | tenderaxle = | weightondrivers = {{convert|47|lt|5|lcwt|kg|sigfig=4|abbr=on}} | locoweight = {{convert|84|lt|5|lcwt|kg|sigfig=4|abbr=on}} | locotenderweight = | tendertype = | fueltype = Coal | fuelcap = {{convert|96|cuft|abbr=on}} | watercap = {{convert|1200|impgal|L|abbr=on}} | tendercap = | sandcap = | fireboxtype = Round-top | firearea = {{convert|33.5|sqft|m2|abbr=on}} | boiler = | boilertype = | pitch = {{convert|7|ft|6|in|mm|0|abbr=on}} | diameterinside = {{convert|5|ft|mm|0|abbr=on}} | lengthinside = {{convert|12|ft|7|in|mm|0|abbr=on}} | smalltubediameter= '''197:''' {{convert|2|in|mm|0|abbr=on}} | largetubediameter= | boilerpressure = {{convert|200|psi|kPa|0|abbr=on}} | safetyvalvetype = [[Safety valve#Ramsbottom safety valves|Ramsbottom]] | feedwaterheater = | totalsurface = {{convert|1438.33|sqft|m2|abbr=on}} | tubearea = {{convert|1298.13|sqft|m2|abbr=on}} | fluearea = | tubesandflues = | fireboxarea = {{convert|140.2|sqft|m2|abbr=on}} | superheatertype = | superheaterarea = | cylindercount = Four as built, two modified | cylindersize = {{convert|18|in|mm|0|abbr=on}} bore<br>{{convert|20|in|mm|0|abbr=on}} stroke | frontcylindersize= | rearcylindersize = | hpcylindersize = | lpcylindersize = | valvegear = [[Joy valve gear|Joy]] | valvetype = [[Slide valve#Balanced slide valve|Balanced slide]] | valvetravel = | valvelap = | valvelead = | transmission = | trainheating = | locobrakes = Counter-pressure steam | trainbrakes = Vacuum | safety = | coupling = [[Railway coupling#Johnston coupler|Johnston link-and-pin]] | maxspeed = | poweroutput = | tractiveeffort = {{convert|23000|lbf|kN|abbr=on}} @ 75% | factorofadhesion = | locobrakeforce = | operator = Central South African Railways<br>South African Railways | operatorclass = CSAR Rack | powerclass = | numinclass = 2 | fleetnumbers = CSAR 995-996<br>SAR O995-O996 | officialname = | nicknames = | axleloadclass = | locale = | deliverydate = 1905 | firstrundate = 1905 | lastrundate = | withdrawndate = 1915 | preservedunits = | restoredate = | scrapdate = | currentowner = | disposition = | notes = }}
The '''Central South African Railways Rack 4-6-4RT''' of 1905 was a South African steam locomotive from the pre-[[Union of South Africa|Union]] era in [[Transvaal Colony]].
In 1905, the Central South African Railways placed two four-cylinder rack tank locomotives with a 4-6-4 Baltic type wheel arrangement in service on the section between Waterval Onder and Waterval Boven. The locomotives were underpowered and proved to be failures in rack service, with the result that their rack mechanisms were removed in 1906 to convert them to ordinary two-cylinder tank locomotives.<ref name="Holland 1">{{Holland-Vol 1|pages=135-137}}</ref><ref name="SAR&H Feb 1945">Espitalier, T.J.; Day, W.A.J. (1945). ''The Locomotive in South Africa – A Brief History of Railway Development. Chapter VI – Imperial Military Railways and C.S.A.R.'' (Continued). South African Railways and Harbours Magazine, February 1945. pp. 99–100.</ref>
==Manufacturer== In 1905, the Central South African Railways (CSAR) placed orders with [[Vulcan Foundry]] for the construction of two 4-6-4 Baltic type rack tank locomotives for use on the rack section between [[Waterval Onder]] and [[Waterval Boven]]. According to the designs and specifications of CSAR Chief Locomotive Superintendent P.A. Hyde, the CSAR Rack locomotive was to have a [[Locomotive frame#Bar frames|bar frame]], two cylinders with {{convert|18|in|mm|abbr=off|sigfig=3}} bore and {{convert|30|in|mm|abbr=off|sigfig=3}} stroke, and was to use the same drive system as the ''Nederlandsche-Zuid-Afrikaansche Spoorweg-Maatschappij'' [[NZASM 32 Tonner 0-4-2RT|{{nowrap|32 Tonner}}, CSAR Class G]], which had proven satisfactory in rack service. The two locomotives were delivered in 1905, numbered 995 and 996, following on from the number range of the Class G rack locomotives.<ref name="Holland 1"/>
The builders chose not to adhere to the original designs and specifications. The cylinder stroke was reduced to {{convert|20|in|mm|abbr=off|sigfig=3}} and two inner cylinders of the same dimensions were added to drive the rack mechanism independently. A [[Locomotive frame#Plate frames|plate frame]] was used instead of the specified bar frame. The main plate frames were {{convert|1+1/4|in|mm|0|abbr=off}} thick and were arranged outside the coupled wheels. The balanced flat [[slide valve]]s were actuated by [[Joy valve gear]].<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/><ref name="Soul of a Railway 8-1">[https://sites.google.com/site/soulorailway/home/system-8/part-1-pretoria-local-services-workshops-and-running-sheds Soul of A Railway, System 8, Part 1: Pretoria: including local services, workshops and running sheds, Part 1. Introduction.] {{Webarchive|url=https://web.archive.org/web/20170319200012/https://sites.google.com/site/soulorailway/home/system-8/part-1-pretoria-local-services-workshops-and-running-sheds |date=19 March 2017 }} (Accessed on 15 March 2017)</ref>
The boiler capacity was not increased to compensate for the additional cylinders and, in service, trouble was experienced under working conditions. Tests showed that the locomotives could not maintain steam and had insufficient adhesive weight to prevent slipping on the steep gradient. The boiler had to generate the supply of steam while the engine passed through the tunnel at the head of the incline with the blast pipe not functioning, since the exhaust steam was diverted to the side tanks while the counter-pressure air brake system was in operation.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/><ref name="Soul of a Railway 8-1"/>
==Characteristics== Even though it turned out to be a failure in service, the locomotive design had several novel features at the time.<ref name="Holland 1"/>
===Rack mechanism=== The outside cylinders drove the coupled wheels and the inside cylinders drove a coupled pair of rack wheels. The rack wheels were carried on a frame suspended from the widely separated leading and driving coupled wheel axles, which had an {{convert|8|ft|3|in|mm|0|abbr=off}} wheelbase.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/>
Rather than the bar frame as specified, an outside plate frame was used to accommodate the inside cylinders. The connecting rods of the inside engine were not connected directly to the crank pins, but to projections on the coupling rods which actuated the rack gear. This method of coupling was unavoidable due to the restricted width of only {{convert|3|ft|3|in|mm|0|abbr=off}} between tyres.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/>
To compensate for tyre wear on the coupled driving wheels, the rack axle bearings could be adjusted vertically, while the rack wheel teeth were of [[Involute gear|involute]] form to ensure correct action between adjustments. The inner cranks were of the disk type, with triangular circumferential grooves to take the cast-iron brake blocks of the rack engine hand brake.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/>
===Brake systems=== The valve gear of the outside and inside sets of motion could each be separately reversed by its own screw gear, while each set also had its own independent regulators, injectors and feed pumps. The locomotive had steam brakes on all coupled wheels as well as both bogies, the first and last South African steam locomotive to be equipped with braked bogies. The coupled wheels and the rack engine's crank disks had separate hand brakes and the inside and outside piston pairs had separate counter-pressure air brakes. In addition, the locomotive had a combination ejector to work the train's vacuum brakes.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/>
The [[Louis Le Chatelier|Le Chatelier]] counter-pressure air brake system made use of the following: * A valve in the base of the blastpipe isolated the cylinders from the smokebox to prevent the ingress of hot gases and cinders when the motion was reversed. * Air was drawn from outside the smokebox through a pair of non-return valves into the exhaust ports, from where it was compressed into the steam chests. * The compressed air was allowed to escape into the atmosphere through a graduating discharge valve and a silencer, mounted behind the chimney. * To take up the heat of compression and prevent overheating of the cylinders, a small water jet delivered a cold spray into the exhaust passages.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/>
===Cab=== To protect the crew from the smoke and gases in the tunnel, the large cab was totally enclosed and had side doors and windows.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/>
==Service==
===Central South African Railways=== [[File:CSAR Rack 4-6-4T no. 995.jpg|thumb|x170px|Converted rack no. 0995, {{circa|1912}}]] In spite of its advanced features, the CSAR Rack locomotive was a failure and was outperformed by the older and much smaller predecessor [[NZASM 32 Tonner 0-4-2T|Class G]] rack locomotive. As a result, the rack mechanisms of both locomotives were removed within a year of their entering service, converting them to ordinary two-cylinder tank locomotives. Owing to their failure, the old 32 Tonners remained in service until 1908, when a new alignment with easier gradients, including a new tunnel, was constructed and the rack section could be abandoned.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/><ref name="Soul of a Railway 8-1"/><ref name="SAR&H Nov 1944">Espitalier, T.J.; Day, W.A.J. (1944). ''The Locomotive in South Africa – A Brief History of Railway Development. Chapter IV – The N.Z.A.S.M.'' (Continued). South African Railways and Harbours Magazine, November 1944. pp. 843–844.</ref>
Their failure can be attributed directly to the fact that two additional cylinders were introduced by the builders while the boiler capacity remained the same, which resulted in a locomotive with an inadequate steaming ability. In addition, the complicated rack mechanism led to perpetual maintenance problems.<ref name="Holland 1"/><ref name="SAR&H Feb 1945"/><ref name="Soul of a Railway 8-1"/>
===South African Railways=== When the [[Union of South Africa]] was established on 31 May 1910, the three Colonial government railways ([[Cape Government Railways]], [[Natal Government Railways]] and CSAR) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.<ref name="SAR History">''The South African Railways – Historical Survey''. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.</ref><ref name="SAR Renumber"/>
In 1912, the locomotives were considered obsolete and were not classified or renumbered, but instead only had the numeral "0" prefixed to their existing numbers. Both locomotives were withdrawn from service by 1915, a mere ten years after being built.<ref name="SAR Renumber">Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 11, 13, 18 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)</ref><ref name="Paxton-Bourne">{{Paxton-Bourne|page=23}}</ref>
==References== {{Commons category|CSAR Rack (4-6-4T)|CSAR Rack 4-6-4RT|position=left}} {{Reflist}} {{Locomotives of the CSAR}} {{Locomotives of South Africa}}
[[Category:CSAR locomotives|0490]] [[Category:P.A. Hyde locomotives|0490]] [[Category:4-6-4T locomotives]] [[Category:2′C2′ locomotives]] [[Category:Vulcan Foundry locomotives]] [[Category:Cape gauge railway locomotives]] [[Category:Rack and cog driven locomotives]] [[Category:Railway locomotives introduced in 1905]] [[Category:1905 in South Africa]] [[Category:Scrapped locomotives]]