# Elbow engine

> Mediated Wiki article. Canonical URL: https://mediated.wiki/source/Elbow_engine
> Markdown URL: https://mediated.wiki/source/Elbow_engine.md
> Source: https://en.wikipedia.org/wiki/Elbow_engine
> Source revision: 1287994427
> License: Creative Commons Attribution-ShareAlike 4.0 International (https://creativecommons.org/licenses/by-sa/4.0/)

thumb|The method of operation of a single-cylinder elbow engine. Output is taken from one of the cylinder blocks. Two or more cylinders are invariably used so as to balance the centre of mass. Steam admission/exhaust plate not shown.
thumb|Diagram of simplified 2-piston elbow engine
An '''elbow engine''' is a [piston](/source/piston)-based [steam engine](/source/steam_engine) typically fed by [steam](/source/steam) or [compressed air](/source/compressed_air) to drive a flywheel and/or mechanical load. It is based on a mechanism known as a [Hobson's joint](/source/Hobson's_joint). Although not commonly used today for practical purposes, it is still built by hobbyists for its rarity and unconventionality.

== Principle of operation ==
Elbow engines have two rotating, circular, cylinder blocks. Each block contains a ring of parallel cylinders and can itself rotate on a central axis, similar to a [revolver cylinder](/source/Cylinder_(firearms)). The two blocks are placed at 90° to each other. Each piston is L-shaped, and circular in cross section with one end fitted into each cylinder block. The two cylinder blocks rotate together, coupled only by the pistons. Engine output is taken from the rotation of one cylinder block.

Pressure is supplied to each cylinder by means of a fixed plate forming a plain [thrust bearing](/source/thrust_bearing) with the back of the cylinder block. This has two openings in it which supply and exhaust steam to and from the cylinder; as the cylinder block rotates it opens and closes communication with each pipe. This method of valveless steam admission is also used on many basic [oscillating cylinder](/source/oscillating_cylinder) engines. This arrangement results in a compact engine with a low part count, at the expense of including a large frictional surface.

== Problems ==
Despite their apparent simplicity, elbow engines can be difficult to troubleshoot. They are also known to splatter oil when operating.

==References==
* Jeremy Harris, Willard Slay. "[https://web.archive.org/web/20211030190829/http://www.john-tom.com/MyPlans/Steam%20Engines/ElbowEngine.pdf You Can Make This Incredible Elbow Engine]" ''Popular Mechanics'' July 1965 p.166

== External links ==
* [https://www.youtube.com/watch?v=5ZRKNlY7enM Video of (6-cylinder) elbow engine in operation]
* [https://www.youtube.com/watch?v=2F58EKhapHY 3D simulation of elbow engine construction and operation]

Category:Steam engines by layout

---
Adapted from the Wikipedia article [Elbow engine](https://en.wikipedia.org/wiki/Elbow_engine) by Wikipedia contributors ([contributor history](https://en.wikipedia.org/wiki/Elbow_engine?action=history)). Available under [Creative Commons Attribution-ShareAlike 4.0 International](https://creativecommons.org/licenses/by-sa/4.0/). Changes may have been made.