# 6-2-0

> Mediated Wiki article. Canonical URL: https://mediated.wiki/source/6-2-0
> Markdown URL: https://mediated.wiki/source/6-2-0.md
> Source: https://en.wikipedia.org/wiki/6-2-0
> Source revision: 1345559888
> License: Creative Commons Attribution-ShareAlike 4.0 International (https://creativecommons.org/licenses/by-sa/4.0/)

Locomotive wheel arrangement

A drawing of a [C&A](/source/Camden_and_Amboy_Railroad) 6-2-0, c. 1847.

In the [Whyte notation](/source/Whyte_notation), a **6-2-0** is a [railroad](/source/Railroad) [steam locomotive](/source/Steam_locomotive) that has an unpowered three-axle [leading truck](/source/Leading_truck) followed by a single powered [driving axle](/source/Driving_axle). This [wheel arrangement](/source/Wheel_arrangement) is associated with the [Crampton locomotive](/source/Crampton_locomotive) type, and in the USA the single class were sometimes referred to as ***Cramptons***.

Other equivalent classifications are:

- [UIC classification](/source/UIC_classification): **3A** (also known as German classification and [Italian classification](/source/Italian_classification))

- [French classification](/source/French_classification): **310**

- [Turkish classification](/source/Turkish_classification): **14**

- [Swiss classification](/source/Swiss_classification): **1/4**

## Overview

The 6-2-0 was a most unusual wheel arrangement, where the bulk of the locomotive's weight was on the unpowered [leading wheels](/source/Leading_wheel) rather than the powered [driving wheels](/source/Driving_wheel), therefore giving poor adhesion, and the long wheelbase did not help it gain popularity either. The type was only practicable on the [Crampton locomotive](/source/Crampton_locomotive) with a low boiler and large driving wheels placed behind the [firebox](/source/Firebox_(steam_engine)).

## Usage

### United Kingdom

A drawing of the LNWR Liverpool without her tender

The only British 6-2-0 was the locomotive *Liverpool* built in 1848 by [Bury, Curtis, and Kennedy](/source/Bury%2C_Curtis%2C_and_Kennedy) for the [London and North Western Railway](/source/London_and_North_Western_Railway). It was exhibited at [The Great Exhibition](/source/The_Great_Exhibition) in 1851 and was moderately successful with her 48-horsepower, large driving wheels and high top speed for the time, yet despite her ability to haul heavy [expresses](/source/Express_train) over long distances no more were built due to her tendency to spread the track on curves as she ran caused by her long, fixed wheelbase.[1]

### United States

 One of the American Cramptons, incorrectly dated to 1847

On a trip to England, [Robert L. Stevens](/source/Robert_L._Stevens), president of the [Camden and Amboy](/source/Camden_and_Amboy) (C&A) railroad, saw demonstrations of [Crampton locomotives](/source/Crampton_locomotive) on the railways there, most likely of the LNWR's Bury-built *"Liverpool"*. When he returned in 1848, Stevens asked his master mechanic [Isaac Dripps](/source/Camden_and_Amboy) to build him a 6-2-0 for use on the C&A. The specifications for the first 6-2-0 included a 38" diameter boiler that would burn [anthracite coal](/source/Anthracite_coal) and 96" diameter driving wheels.

Designing the locomotive type to burn coal, which was still fairly expensive and difficult to come by, was unusual for the time. The great majority of locomotives of the 1830s and 1840s were built to burn wood, which was very plentiful, cheap and exceptionally easy to obtain along the railroad rights of way. Besides being more expensive, coal required a larger [firebox](/source/Firebox_(steam_engine)) in which to burn. Dripps rose to the challenge and created an operable design.

The first of three locomotives based on these specifications, named *[John Stevens](/source/John_Stevens_(inventor%2C_born_1749))* after Robert's father, was completed in 1849. Dripps wasn't too sure that the locomotive would prove effective on American railroads, and his reservations turned out to be correct. The locomotive's tractive effort was not sufficient for long term or heavy work. With only one driving axle and three unpowered leading axles, too much of the locomotive's weight was distributed over the unpowered lead three axles, not to mention the fact that the C&A's tracks were not built nor modified to handle the high speed services that these engines were built for. Almost a century passed before a six-wheel leading truck was used again, on the [PRR S1](/source/PRR_S1) and [S2](/source/PRR_S2).

The C&A's management, on the other hand, thought it performed admirably enough to order two more of them and place them in [passenger service](/source/Passenger_train). It was claimed that they could reach 60 m.p.h. at a time when fast trains reached only 40 m.p.h. The 6-2-0s were later rebuilt to [4-4-0s](/source/4-4-0) and were in use as late as 1865.

## References

1. **[^](#cite_ref-1)** Hamilton Ellis, *Some classic locomotives,* George Allen and Unwin, 1949, pp.11-12.

- White, John H. Jr. (1968). *A history of the American locomotive; its development: 1830–1880*. New York, NY: Dover Publications. [ISBN](/source/ISBN_(identifier)) [0-486-23818-0](https://en.wikipedia.org/wiki/Special:BookSources/0-486-23818-0).

- [*John Stevens* history](https://web.archive.org/web/20041021020839/http://railroadtreasures.com/Prints.htm)

v t e Steam locomotive wheel arrangements (Whyte notation) Single engine types 0-2-2 0-2-4 2-2-0 2-2-2 2-2-4T 4-2-0 4-2-2 4-2-4T 6-2-0 0-3-0 (monorail) 0-4-0 0-4-0+4 0-4-2 0-4-4T 0-4-6T 2-4-0 2-4-2 2-4-4T 2-4-6T 4-4-0 4-4-2 4-4-4 4-4-6 0-6-0 0-6-2 0-6-4T 0-6-6T 2-6-0 2-6-2 2-6-4 2-6-6T 4-6-0 4-6-2 4-6-4 0-8-0 0-8-2 0-8-4T 0-8-6T 2-8-0 2-8-2 2-8-4 2-8-6 4-8-0 4-8-2 4-8-4 4-8-6 6-8-6 0-10-0 0-10-2 2-10-0 2-10-2 2-10-4 4-10-0 4-10-2 0-12-0 2-12-0 2-12-2 2-12-4T 4-12-2 4-14-4 Divided drive and duplex engine types 0-2-2-0 2-2-2-0 2-2-2-2 2-2-4-0T 4-2-2-0 2-4-6-2 4-4-4-4 6-4-4-6 4-4-6-4 4-6-4-4 Articulated locomotives Fairlie, Meyer and Garratt types 0-4-0+0-4-0 2-4-0+0-4-2 2-4-2+2-4-2 4-4-2+2-4-4 0-6-0+0-6-0 0-6-2+2-6-0 2-6-0+0-6-2 2-6-2+2-6-2 4-6-0+0-6-4 4-6-2+2-6-4 4-6-4+4-6-4 0-8-0+0-6-0T 2-8-0+0-8-2 2-8-2+2-8-2 4-8-0+0-8-4 4-8-2+2-8-4 4-8-4+4-8-4 Articulated locomotives Mallet types 0-4-4-0 0-4-4-2 2-4-4-0 2-4-4-2 0-6-6-0 2-6-6-0 2-6-6-2 2-6-6-4 2-6-6-6 2-6-8-0 4-4-6-2 4-6-6-2 4-6-6-4 0-8-8-0 2-8-8-0 2-8-8-2 2-8-8-4 4-8-8-2 4-8-8-4 2-10-10-2 Articulated locomotives Triplex and other multiplex types 2-8-8-8-2 2-8-8-8-4 2-8-8-8-8-2 0-6-2+2-4-2-4-2+2-6-0 2-6-6-2+2-6-6-2 2-8-8-8-8-8-2 2-10-10-10-10-10-2 2-4-4-2+2-8-8-2+2-4-4-2 Articulated locomotives Engerth types 0-4-4T 0-4-6T 2-6-4 0-6-4T 0-6-4-0 0-8-4T 0-8-6T Geared locomotives Shay Climax Heisler Willamette Other notation forms: AAR Swiss UIC

---
Adapted from the Wikipedia article [6-2-0](https://en.wikipedia.org/wiki/6-2-0) by Wikipedia contributors ([contributor history](https://en.wikipedia.org/wiki/6-2-0?action=history)). Available under [Creative Commons Attribution-ShareAlike 4.0 International](https://creativecommons.org/licenses/by-sa/4.0/). Changes may have been made.